sbca96
Commander Member
![](images/icon_star_blue.gif) ![](images/icon_star_blue.gif) ![](images/icon_star_blue.gif) ![](images/icon_star_blue.gif) ![](images/icon_star_blue.gif)
USA
2470 Posts |
Posted - 02/26/2009 : 01:33:15 AM
|
Was putting the serial number and tolerance stamping on these tonight getting them ready to ship, and I wanted to confirm how the CNC made brackets fit the single piston caliper. Here is what the very common 1994-1998 Mustang GT caliper :
![](https://emperorjordan.com/sbca96/images/avantibrakeproject/CNC_brackets/GT_bracket_001a.jpg)
Here is how the brackets fit them, this is the half moon cutout that I have been mentioning that isnt required for the Cobra caliper :
![](https://emperorjordan.com/sbca96/images/avantibrakeproject/CNC_brackets/GT_bracket_002a.jpg)
![](https://emperorjordan.com/sbca96/images/avantibrakeproject/CNC_brackets/GT_bracket_003a.jpg)
![](https://emperorjordan.com/sbca96/images/avantibrakeproject/CNC_brackets/GT_bracket_004a.jpg)
Tom
'63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: TKO 5-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires |
|