Don't run your wires over the tops of the VC's. That looks tacky. Run them
around the back of the VC's and forward to each plug. Get yourself some of
them there universal wires. I prefer the Taylor brand. They have them in
just about any color you could want. The plug end is already made up in
either 180 degree, 90 degree, or 135 degree. The 135 degree works best on
Studes. They come with both HEI and conventional dist. ends and boots which
you have to put on after you cut the wire to the right length. Use small tie
wraps (same color as the wires also Taylor brand) to make the wire
separators. Don't bunch the wires together but instead make wire separators.
Put a tie wrap loosely around each wire, then a tie wrap connecting the tie
wraps together, tighten them all up and cut off the excess.
Also make sure you keep the #5 and #7 wires separated to prevent cross
firing.
JF
==================