////////////
I'm swapping out the Champ6 for a V8....  what engine mounts? 

///////////////////

I believe your car needs the 530214 (right) and 530215 (left) mounts.  These
are for a '51-52 Commander, and I would guess they are what you need to
convert the 6 to V8.

You're also going to need the correct engine mounting brackets (not to be
confused with the frame mounts above) and the correct insulators, and
hardware.  The engine brackets should be 529342's for the V8 in the above
frame mounts.  Insulators are 520987 (upper) and 530276 (lower).  The
insulator spacers are 194496.  Bolts are 1/2" x 20 x 2 3/4".

Your rear engine support crossmember is the same for 6's and V8's with stick
shifts.  (529069).  Also the cage for the rear support insulator (529269)
and the insulator itself (529338) are the same for 6's and V8's with stick
shifts.

BTW, the 532399 mount you have is a left side for a '53-54 Champ, non C/K.

I would think all of the above conversion stuff (with the exception of the
insulators - you should buy these new), is available used from NG members.
What say guys?

-Dick-