Bob's Studebaker Resource Website

Studebaker & Avanti wheels

......................Compliments of

[ Tire Codes/Facts ] [ Tire Size Formulas ] [ Tire Troubles ]

    Ace Alloy Style A-106 (NLA)
    Here's what I found for my car

    16 X 7 , +15 offset, 5 X 114.3, 1580 Lbs load rating per wheel, T-6 Aluminum
    1 inch larger diameter, 1 inch larger width and the '+15mm' offset makes the fit a near exact replacement. The added width splits the wheel centerline plane evenly. The 16 inch size puts the tie rod inside the rim diameter and assures end to rim clearance.
    I use Pirelli P4000, 215/60VR16 on the front with absolutely no frame interference, 225/60VR16 on the rear.

    CLICK HERE for more info

These pages and programming contained therin
are © Bob Johnstone, 1996 - 2009, All Rights Reserved. Most technical opinions are my own from experience, some informational data is from other sources with credits when available and while care has been taken to be as a accurate as possible, it is offered only as a guide and caution should be exercised in the application of it.